| Installing the Sweet Multiport PCi Card |
||||
1. Locate an available PCI slot. In general,
select a PCI slot that is closest to the built-in FireWire
ports on the logic board. Remove the slot cover. Keep the
retaining screw. |
||||
 |
||||
| 5. Close the door of your system. Make sure that the Sweet Multiport interconnect cable is not crimped or interfere with the computer chassis. | ||||
|
||||
| 6. Install the FireWire and USB
cables from the ports on the logic board to the ports on the
Sweet PCI card. The FireWire cable can go into any of the three
available ports. The USB cable must be the plugged into the
bottom port on the Sweet PCI card. |
||||
|
||||
Congratulations! Installation of the Sweet
Multiport is now complete. You can now reconnect other cable
and power on your system. |
||||
