| Installing the Sweet Multiport - G4 Mirror Drive Door |
||||
 |
1.
Before opening your computer, shut it down. |
|||
 |
||||
| 5. Unscrew the two screws hold the bracket in place. | ||||
 |
||||
| 6. Rotate the bracket and insert
Sweet carrier with the front panel card and interconnect cable
into the drive bracket. As you insert the carrier, make sure
that the interconnect cable goes out the back of the bracket
and towards the far left side (when viewed from front) of the
bracket. 7. Fasten the Sweet carrier in place with four screws. |
||||
|
||||
| 8. Reinstall the
drive bracket and screws that holds it in place. 9. Reinstall the shield at the back of the drive bay. The interconnect cable should out at the bottom of the shield, just above the fan. 10. Install the metal handle on the lower drive door. Remove the tape backing on one side of the handle and securely press it on the door. |
||||
 |
||||
11. The last step is to install the Sweet PCI card. |
||||
